'Generic Commit'

.gitea/workflows/test.yaml

@@ -14,14 +14,26 @@ jobs:
         uses: actions/checkout@v4
       - name: Install build dependencies
         run: |
-          cd ${{ gitea.workspace }}/source
+          cd source
           ./install_build_prerequisites.sh
-      - name: Build
+      - name: Build Native
         run: |
-          cd ${{ gitea.workspace }}/source
-          ./multibuild.sh
+          cd source
+          ./build_native.sh
       - name: Test
         run: |
-          cd ${{ gitea.workspace }}/source/output
-          ./dropshell_x86_64 list
-          ./dropshell_x86_64 help
+          cd source
+          ./test.sh
+      - name: Build Production
+        run: |
+          cd source
+          ./build_production.sh
+      - name: Test
+        run: |
+          cd source
+          ./test.sh
+      - name: Publish
+        run: |
+          cd source
+          ./publish.sh
+  

dropshell-install.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+set -euo pipefail
+
+# download and install dropshell
+
+# 1. Determine architecture
+# ----------------------------------------------------------------------------- 
+
+ARCH=$(uname -m)
+
+TARGET_PATH="${HOME}/.local/bin/dropshell"
+[ ! -f "${TARGET_PATH}" ] || rm -f "${TARGET_PATH}"
+mkdir -p "$(dirname "${TARGET_PATH}")"
+curl -L -s -o "${TARGET_PATH}" "https://getbin.xyz/dropshell.${ARCH}" || die "Failed to download dropshell for ${ARCH}"
+chmod +x "${TARGET_PATH}"
+echo "dropshell installed successfully to $TARGET_PATH"
+echo " "
+
+echo "Please:"
+echo "1. run '${TARGET_PATH} edit' to edit the configuration."
+echo "2. run '${TARGET_PATH} install' to install dropshell components on this computer."
+echo "3. run 'source ~/.bashrc' to add to your path and autocomplete for the current shell."

dropshell-server-autosetup.sh

@@ -1,4 +1,6 @@
-# can you make this script run in bash, but fall back to sh if bash is not installed?
+#!/bin/bash
+
+# set up a remote server for use with dropshell.
 
 # check if we are running as root
 if [ "$(id -u)" -ne 0 ]; then

install.sh

@@ -1,49 +0,0 @@
-#!/bin/bash
-set -e
-
-# download and install dropshell
-
-# 1. Determine architecture
-# ----------------------------------------------------------------------------- 
-
-ARCH=$(uname -m)
-if [[ "$ARCH" == "x86_64" ]]; then
-    BIN=dropshell.x86_64
-elif [[ "$ARCH" == "aarch64" || "$ARCH" == "arm64" ]]; then
-    BIN=dropshell.aarch64
-else
-    echo "Unsupported architecture: $ARCH" >&2
-    exit 1
-fi
-
-
-# 2. Download the appropriate binary to a temp directory
-# -----------------------------------------------------------------------------
-TMPDIR=$(mktemp -d)
-trap 'rm -rf "$TMPDIR"' EXIT
-URL="https://gitea.jde.nz/public/dropshell/releases/download/latest/$BIN"
-echo "Downloading $BIN from $URL..."
-
-TARGET_PATH="${HOME}/.local/bin/dropshell"
-
-mkdir -p "${HOME}/.local/bin"
-
-curl -fsSL -o "$TARGET_PATH" "$URL"
-
-if [ ! -f "$TARGET_PATH" ]; then
-    echo "Failed to download dropshell" >&2
-    exit 1
-fi
-
-chmod +x "$TARGET_PATH"
-
-if [ ! -f "${HOME}/.local/bin/ds" ]; then
-    ln -s "$TARGET_PATH" "${HOME}/.local/bin/ds"
-fi
-
-echo "dropshell installed successfully to $TARGET_PATH"
-
-echo "Please:"
-echo "1. run '${TARGET_PATH} edit' to edit the configuration."
-echo "2. run '${TARGET_PATH} install' to install dropshell components on this computer."
-echo "3. run 'source ~/.bashrc' to add to your path and autocomplete for the current shell."

source/CMakeLists.txt

@@ -46,17 +46,16 @@ set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_SOURCE_DIR}/cmake)
 file(GLOB_RECURSE SOURCES "src/*.cpp")
 file(GLOB_RECURSE HEADERS "src/*.hpp")
 
-# Add custom target to run make_createagent.sh at the start of the build process
-add_custom_target(run_createagent ALL
-    COMMAND ${CMAKE_COMMAND} -E echo "Running make_createagent.sh..."
-    COMMAND ${CMAKE_COMMAND} -E env bash ${CMAKE_CURRENT_SOURCE_DIR}/make_createagent.sh
+# Add custom target to run cmake_prebuild.sh at the start of the build process
+add_custom_target(run_prebuild_script ALL
+    COMMAND ${CMAKE_COMMAND} -E echo "Running cmake_prebuild.sh..."
+    COMMAND ${CMAKE_COMMAND} -E env bash ${CMAKE_CURRENT_SOURCE_DIR}/cmake_prebuild.sh
     WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
-    COMMENT "Running make_createagent.sh before build"
 )
 
 # Add executable
 add_executable(dropshell ${SOURCES})
-add_dependencies(dropshell run_createagent)
+add_dependencies(dropshell run_prebuild_script)
 
 # Mark the generated files as GENERATED so CMake knows they'll be created during build
 set_source_files_properties(

source/agent-local/agent-install.sh

@@ -1,5 +1,8 @@
 #!/bin/bash
 
+# install the dropshell host agent on this computer.
+# (not for remote servers)
+
 SCRIPT_DIR=$(dirname "$0")
 
 echo "Installing dropshell host agent on this computer..."
@@ -22,27 +25,6 @@ _check_required_env_vars() {
     done
 }
 
-# Checks if Docker is installed, running, and user has permission. Returns 1 on failure.
-_check_docker_installed() {
-    if ! command -v docker &> /dev/null; then
-        echo "Docker is not installed"
-        return 1
-    fi
-
-    # check if docker daemon is running
-    if ! docker info &> /dev/null; then
-        echo "Docker daemon is not running"
-        return 1
-    fi
-
-    # check if user has permission to run docker
-    if ! docker run --rm hello-world &> /dev/null; then
-        echo "User does not have permission to run docker"
-        return 1
-    fi
-
-    return 0
-}
 
 function install_bb64() {    
     # check curl installed
@@ -77,7 +59,5 @@ set +a
 _check_required_env_vars "AGENT_LOCAL_PATH"
 echo "Installing host agent into $AGENT_LOCAL_PATH"
 
-_check_docker_installed || _die "Docker is required."
-
 install_bb64
 

source/agent-remote/_allservicesstatus.sh

@@ -38,6 +38,7 @@ CURRENT_EXIT_CODE=0
 load_dotenv(){
     local file_path=$1
     if [ -f "${file_path}" ]; then
+    # shellcheck source=/dev/null
         source "${file_path}"
     fi
 }
@@ -69,9 +70,9 @@ function run_command() {
         load_dotenv "${service_path}/config/.template_info.env"
 
         # update the main variables.
-        CONFIG_PATH="${service_path}/config"
-        SERVICE="${SERVICE_NAME}"
-        DOCKER_CLI_HINTS=false
+        export CONFIG_PATH="${service_path}/config"
+        export SERVICE="${SERVICE_NAME}"
+        export DOCKER_CLI_HINTS=false
 
         set +a
 

source/agent-remote/agent-install.sh

@@ -21,16 +21,13 @@ fi
 _check_required_env_vars "AGENT_PATH"
 
 function install_bb64() {    
-    curl -fsSL "https://gitea.jde.nz/public/bb64/releases/download/latest/install.sh" | bash -s -- "$AGENT_PATH" "$(id -u $USER):$(id -g $USER)"
-
-    # test result code from curl
-    if [ $? -ne 0 ]; then
+    if ! curl -fsSL "https://gitea.jde.nz/public/bb64/releases/download/latest/install.sh" | \
+            bash -s -- "$AGENT_PATH" "$(id -u "$USER"):$(id -g "$USER")"; then
         _die "Failed to install bb64. Curl returned non-zero exit code."
     fi
 
     # test if bb64 is installed
-    VER=$("$AGENT_PATH/bb64" -v)
-    if [ $? -ne 0 ]; then
+    if ! VER=$("$AGENT_PATH/bb64" -v); then
         _die "bb64 did not install correctly."
     fi
 
@@ -53,6 +50,12 @@ if ! command -v docker &> /dev/null; then
     exit 1
 fi
 
+# check rsync installation
+if ! command -v rsync &> /dev/null; then
+    echo "Rsync is not installed. Rsync is required for agent installation."
+    exit 1
+fi
+
 
 #-------------------------------------------------------------------------
 

source/agent-remote/common.sh

@@ -41,18 +41,18 @@ _create_and_start_container() {
     local run_cmd="$1"
     local container_name="$2"
 
-    if _is_container_exists $container_name; then
-        _is_container_running $container_name && return 0
-        _start_container $container_name
+    if _is_container_exists "$container_name"; then
+        _is_container_running "$container_name" && return 0
+        _start_container "$container_name"
     else
         $run_cmd
     fi
 
-    if ! _is_container_running $container_name; then
+    if ! _is_container_running "$container_name"; then
         _die "Container ${container_name} failed to start"
     fi
 
-    ID=$(_get_container_id $container_name)
+    ID=$(_get_container_id "$container_name")
     echo "Container ${container_name} is running with ID ${ID}"
 }
 
@@ -93,6 +93,7 @@ _check_docker_installed() {
 
 # Checks if a container (any state) exists. Returns 1 if not found.
 _is_container_exists() {
+    [ -n "${1:-}" ] || { echo "_is_container_exists: Container name is empty" >&2; return 1; }
     if ! docker ps -a --format "{{.Names}}" | grep -q "^$1$"; then
         return 1
     fi
@@ -101,6 +102,7 @@ _is_container_exists() {
 
 # Checks if a container is currently running. Returns 1 if not running.
 _is_container_running() {
+    [ -n "${1:-}" ] || { echo "_is_container_running: Container name is empty" >&2; return 1; }
     if ! docker ps --format "{{.Names}}" | grep -q "^$1$"; then
         return 1
     fi
@@ -119,39 +121,39 @@ _get_container_status() {
 
 # Starts an existing, stopped container.
 _start_container() {
-    _is_container_exists $1 || return 1
-    _is_container_running $1 && return 0
-    docker start $1
+    _is_container_exists "$1" || return 1
+    _is_container_running "$1" && return 0
+    docker start "$1"
 }
 
 # Stops a running container.
 _stop_container() {
-    _is_container_running $1 || return 0;
-    docker stop $1
+    _is_container_running "$1" || return 0;
+    docker stop "$1"
 }   
 
 # Stops (if needed) and removes a container.
 _remove_container() {
-    _stop_container $1
-    _is_container_exists $1 || return 0;
-    docker rm $1
+    _stop_container "$1"
+    _is_container_exists "$1" || return 0;
+    docker rm "$1"
 }
 
 # Prints the logs for a container.
 _get_container_logs() {
-    if ! _is_container_exists $1; then
+    if ! _is_container_exists "$1"; then
         echo "Container $1 does not exist"
         return 1
     fi
 
-    docker logs $1
+    docker logs "$1"
 }
 
 # Checks if listed environment variables are set; calls _die() if any are missing.
 _check_required_env_vars() {
     local required_vars=("$@")
     for var in "${required_vars[@]}"; do
-        if [ -z "${!var}" ]; then
+        if [ -z "${!var:-}" ]; then
             _die "Required environment variable $var is not set"
         fi
     done

source/agent-remote/datacommands.sh

@@ -12,26 +12,26 @@ _autocommandrun_volume() {
 
     case "$command" in
         create)
-            if docker volume ls | grep -q ${volume_name}; then
+            if docker volume ls | grep -q "${volume_name}"; then
                 echo "Volume ${volume_name} already exists - leaving unchanged"
                 return
             fi
             echo "Creating volume ${volume_name}"
-            docker volume create ${volume_name}
+            docker volume create "${volume_name}"
             ;;
         destroy)
             echo "Destroying volume ${volume_name}"
-            docker volume rm ${volume_name}
+            docker volume rm "${volume_name}"
             ;;
         backup)
             echo "Backing up volume ${volume_name}"
-            docker run --rm -v ${volume_name}:/volume -v ${backup_folder}:/backup debian bash -c "tar -czvf /backup/backup.tgz -C /volume . && chown -R $MYID:$MYGRP /backup"
+            docker run --rm -v "${volume_name}":/volume -v "${backup_folder}":/backup debian bash -c "tar -czvf /backup/backup.tgz -C /volume . && chown -R $MYID:$MYGRP /backup"
             ;;
         restore)
             echo "Restoring volume ${volume_name}"
-            docker volume rm ${volume_name}
-            docker volume create ${volume_name}
-            docker run --rm -v ${volume_name}:/volume -v ${backup_folder}:/backup debian bash -c "tar -xzvf /backup/backup.tgz -C /volume --strip-components=1"
+            docker volume rm "${volume_name}"
+            docker volume create "${volume_name}"
+            docker run --rm -v "${volume_name}":/volume -v "${backup_folder}":/backup debian bash -c "tar -xzvf /backup/backup.tgz -C /volume --strip-components=1"
             ;;
     esac
 }   
@@ -48,14 +48,16 @@ _autocommandrun_path() {
                 return
             fi
             echo "Creating path ${path}"
-            mkdir -p ${path}
+            mkdir -p "${path}"
             ;;
         destroy)
             echo "Destroying path ${path}"
-            local path_parent=$(dirname ${path})
-            local path_child=$(basename ${path})
+            local path_parent;
+            path_parent=$(dirname "${path}")
+            local path_child;
+            path_child=$(basename "${path}")
             if [ -d "${path_parent}/${path_child}" ]; then
-                docker run --rm -v ${path_parent}:/volume debian bash -c "rm -rfv /volume/${path_child}" || echo "Failed to destroy path ${path}"
+                docker run --rm -v "${path_parent}":/volume debian bash -c "rm -rfv /volume/${path_child}" || echo "Failed to destroy path ${path}"
             else
                 echo "Path ${path} does not exist - nothing to destroy"
             fi
@@ -63,7 +65,7 @@ _autocommandrun_path() {
         backup)
             echo "Backing up path ${path}"
             if [ -d "${path}" ]; then
-                docker run --rm -v ${path}:/path -v ${backup_folder}:/backup debian bash -c "tar -czvf /backup/backup.tgz -C /path . && chown -R $MYID:$MYGRP /backup"
+                docker run --rm -v "${path}":/path -v "${backup_folder}":/backup debian bash -c "tar -czvf /backup/backup.tgz -C /path . && chown -R $MYID:$MYGRP /backup"
             else
                 echo "Path ${path} does not exist - nothing to backup"
             fi
@@ -73,9 +75,9 @@ _autocommandrun_path() {
                 echo "Backup file ${backup_folder}/backup.tgz does not exist - nothing to restore"
             else
                 echo "Clearing existing data in path ${path}"
-                docker run --rm -v ${path}:/path debian bash -c "rm -rfv /path/{*,.*}"
+                docker run --rm -v "${path}":/path debian bash -c "rm -rfv /path/{*,.*}"
                 echo "Restoring path ${path} from backup file ${backup_folder}/backup.tgz"
-                tar -xzvf ${backup_folder}/backup.tgz -C ${path} --strip-components=1
+                tar -xzvf "${backup_folder}/backup.tgz" -C "${path}" --strip-components=1
             fi
             ;;
     esac
@@ -88,31 +90,36 @@ _autocommandrun_file() {
 
     case "$command" in
         create)
-            filepath_parent=$(dirname ${filepath})
-            filepath_child=$(basename ${filepath})
-            if [ ! -d "${filepath_parent}" ]; then
-                echo "Parent directory ${filepath_parent} of ${filepath_child} does not exist - creating"
-                mkdir -p ${filepath_parent}
+            local file_parent;
+            file_parent=$(dirname "${filepath}")
+            local file_name;
+            file_name=$(basename "${filepath}")
+            if [ ! -d "${file_parent}" ]; then
+                echo "Parent directory ${file_parent} of ${file_name} does not exist - creating"
+                mkdir -p "${file_parent}"
             fi
             ;;
         destroy)
-            rm -f ${filepath}
+            rm -f "${filepath}"
             ;;
         backup)
             echo "Backing up file ${filepath}"
-            local file_parent=$(dirname ${filepath})
-            local file_name=$(basename ${filepath})
+            local file_parent;
+            file_parent=$(dirname "${filepath}")
+            local file_name;
+            file_name=$(basename "${filepath}")
             if [ -f "${file_parent}/${file_name}" ]; then
-                docker run --rm -v ${file_parent}:/volume -v ${backup_folder}:/backup debian bash -c "cp /volume/${file_name} /backup/${file_name} && chown -R $MYID:$MYGRP /backup"
+                docker run --rm -v "${file_parent}":/volume -v "${backup_folder}":/backup debian bash -c "cp /volume/${file_name} /backup/${file_name} && chown -R $MYID:$MYGRP /backup"
             else
                 echo "File ${filepath} does not exist - nothing to backup"
             fi
             ;;
         restore)
             echo "Restoring file ${filepath}"
-            local file_name=$(basename ${filepath})
-            rm -f ${filepath} || die "Unable to remove existing file ${filepath}, restore failed."
-            cp ${backup_folder}/${file_name} ${filepath} || die "Unable to copy file ${backup_folder}/${file_name} to ${filepath}, restore failed."
+            local file_name;
+            file_name=$(basename "${filepath}")
+            rm -f "${filepath}" || return_die "Unable to remove existing file ${filepath}, restore failed."
+            cp "${backup_folder}/${file_name}" "${filepath}" || return_die "Unable to copy file ${backup_folder}/${file_name} to ${filepath}, restore failed."
             ;;
     esac
 }
@@ -153,9 +160,10 @@ _autocommandparse() {
         local value="${pair#*=}"
 
         # create backup folder unique to key/value.
-        local bfolder=$(echo "${key}_${value}" | tr -cd '[:alnum:]_-')
+        local bfolder;
+        bfolder=$(echo "${key}_${value}" | tr -cd '[:alnum:]_-')
         local targetpath="${backup_temp_path}/${bfolder}"
-        mkdir -p ${targetpath}
+        mkdir -p "${targetpath}"
 
         # Key must be one of volume, path or file
         case "$key" in
@@ -191,7 +199,7 @@ databackup() {
 
 
     mkdir -p "$BACKUP_TEMP_PATH"
-    echo "_autocommandparse [backup] [$BACKUP_TEMP_PATH] [$@]"
+    echo "_autocommandparse [backup] [$BACKUP_TEMP_PATH]" "$@"
     _autocommandparse backup "$BACKUP_TEMP_PATH" "$@"
 
     tar zcvf "$BACKUP_FILE" -C "$BACKUP_TEMP_PATH" .
@@ -201,7 +209,7 @@ datarestore() {
     _check_required_env_vars "BACKUP_FILE" "TEMP_DIR"
     BACKUP_TEMP_PATH="$TEMP_DIR/restore"
 
-    echo "_autocommandparse [restore] [$BACKUP_TEMP_PATH] [$@]"
+    echo "_autocommandparse [restore] [$BACKUP_TEMP_PATH]" "$@"
 
     mkdir -p "$BACKUP_TEMP_PATH"
     tar zxvf "$BACKUP_FILE" -C "$BACKUP_TEMP_PATH" --strip-components=1

source/build.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
-
-# Exit on error
-set -e
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-NC='\033[0m' # No Color
-
-JOBS=4
-# Determine number of CPU cores for parallel build
-if command -v nproc >/dev/null 2>&1; then
-    JOBS=$(nproc)
-fi
-
-# Function to print status messages
-print_status() {
-    echo -e "${GREEN}[*] $1${NC}"
-}
-
-print_error() {
-    echo -e "${RED}[!] $1${NC}"
-}
-
-print_warning() {
-    echo -e "${YELLOW}[!] $1${NC}"
-}
-
-# ensure we have latest dehydrate.
-dehydrate -u
-
-# Check if build directory exists, if not create it
-if [ ! -d "build" ]; then
-    print_status "Creating build directory..."
-    mkdir build
-fi
-
-# Enter build directory
-cd build
-
-# Check if CMake is installed
-if ! command -v cmake &> /dev/null; then
-    print_error "CMake is not installed. Please install CMake first."
-    exit 1
-fi
-
-# Check if Ninja is installed
-if ! command -v ninja &> /dev/null; then
-    print_error "Ninja is not installed. Please install Ninja first."
-    exit 1
-fi
-
-# Check if ccache is installed
-if ! command -v ccache &> /dev/null; then
-    print_warning "ccache is not installed. Builds will be slower without it."
-    print_warning "Consider installing ccache for faster builds."
-fi
-
-# Configure with CMake
-print_status "Configuring with CMake..."
-cmake .. -G Ninja -DCMAKE_BUILD_TYPE=Debug -DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache
-
-# Build the project
-print_status "Building project..."
-ninja -j"$JOBS"
-
-# Check if build was successful
-if [ $? -eq 0 ]; then
-    print_status "Build successful!"
-else
-    print_error "Build failed!"
-    exit 1
-fi
-
-print_status "Auto-installing dropshell locally..."
-mkdir -p "${HOME}/.local/bin"
-cp "$SCRIPT_DIR/build/dropshell" "${HOME}/.local/bin/dropshell"
-
-# Return to original directory
-cd ..
-
-print_status "Build process completed!" 

source/build_native.sh

@@ -0,0 +1,53 @@
+#!/bin/bash
+
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+OUTPUT_DIR=${SCRIPT_DIR}/output
+INSTALL_DIR=${HOME}/.local/bin
+mkdir -p "${OUTPUT_DIR}"
+
+# Exit on error
+set -euo pipefail
+
+ARCH=$(uname -m)
+if [ "$ARCH" != "x86_64" ] && [ "$ARCH" != "aarch64" ]; then
+    echo "Unsupported architecture: $ARCH"
+    exit 1
+fi
+
+
+function build_native() {
+    local BUILDDIR=${SCRIPT_DIR}/build/native
+    local PREVDIR=$PWD
+    local JOBS;
+    JOBS=$(nproc) # Set JOBS to the number of available CPU cores
+    mkdir -p "${BUILDDIR}"
+    cd "${SCRIPT_DIR}" || exit 1
+
+    CC="${HOME}/.musl-cross/${ARCH}-linux-musl-native/bin/${ARCH}-linux-musl-gcc"
+    CXX="${HOME}/.musl-cross/${ARCH}-linux-musl-native/bin/${ARCH}-linux-musl-g++"
+
+
+    cmake -B "${BUILDDIR}" -G Ninja \
+        -DCMAKE_BUILD_TYPE=Debug \
+        -DCMAKE_C_COMPILER_LAUNCHER=ccache \
+        -DCMAKE_CXX_COMPILER_LAUNCHER=ccache \
+        -DCMAKE_LINKER=mold \
+        -DCMAKE_C_COMPILER="${CC}" \
+        -DCMAKE_CXX_COMPILER="${CXX}"
+
+    cd "${BUILDDIR}" || exit 1
+    ninja -j"$JOBS"
+
+    #upx ${BUILDDIR}/dropshell
+    cp "${BUILDDIR}/dropshell" "${OUTPUT_DIR}/dropshell.${ARCH}"
+
+    cd "${PREVDIR}" || exit 1
+}
+
+build_native
+
+
+echo "Auto-installing dropshell locally..."
+mkdir -p "${INSTALL_DIR}"
+cp "${OUTPUT_DIR}/dropshell.${ARCH}" "${INSTALL_DIR}/dropshell"
+echo "Build process completed!" 

source/build_production.sh

@@ -1,8 +1,12 @@
 #!/bin/bash
+set -euo pipefail
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
 
 # Create output directory
-mkdir -p output
-
+mkdir -p "${SCRIPT_DIR}/output"
+PREV_DIR=$(pwd)
+cd "${SCRIPT_DIR}"
+trap 'cd "${PREV_DIR}"' EXIT
 
 function build_arch() {
     local arch=$1
@@ -16,14 +20,14 @@ function build_arch() {
     CC="${HOME}/.musl-cross/${arch}-linux-musl-cross/bin/${arch}-linux-musl-gcc"
     CXX="${HOME}/.musl-cross/${arch}-linux-musl-cross/bin/${arch}-linux-musl-g++"
 
-    BUILDDIR=build/${arch}
-    mkdir -p ${BUILDDIR}
+    BUILDDIR="${SCRIPT_DIR}/build/${arch}"
+    mkdir -p "${BUILDDIR}"  
 
-    cmake -B ${BUILDDIR} -G Ninja -DCMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE} -DCMAKE_C_COMPILER=${CC} -DCMAKE_CXX_COMPILER=${CXX}
-    cmake --build ${BUILDDIR}
+    cmake -B "${BUILDDIR}" -G Ninja -DCMAKE_BUILD_TYPE="${CMAKE_BUILD_TYPE}" -DCMAKE_C_COMPILER="${CC}" -DCMAKE_CXX_COMPILER="${CXX}"
+    cmake --build "${BUILDDIR}"
 
-    upx ${BUILDDIR}/dropshell
-    cp ${BUILDDIR}/dropshell output/dropshell.${arch}
+    upx "${BUILDDIR}/dropshell"
+    cp "${BUILDDIR}/dropshell" "${SCRIPT_DIR}/output/dropshell.${arch}"
 }
 
 build_arch x86_64

source/cmake_prebuild.sh

@@ -1,6 +1,9 @@
 #!/bin/bash
 set -e
 
+# CMake pre-build script.
+# Runs before the build process.
+
 # This script creates two files:
 # src/utils/createagent.hpp
 # src/utils/createagent.cpp
@@ -11,9 +14,11 @@ SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 if ! command -v dehydrate &> /dev/null; then
     echo "dehydrate could not be found - installing"
     curl -fsSL https://gitea.jde.nz/public/dehydrate/releases/download/latest/install.sh | bash
+else
+    # ensure we have latest dehydrate.
+    dehydrate -u
 fi
 
 mkdir -p "${SCRIPT_DIR}/src/autogen"
-
 dehydrate "${SCRIPT_DIR}/agent-remote" "${SCRIPT_DIR}/src/autogen"
 dehydrate "${SCRIPT_DIR}/agent-local" "${SCRIPT_DIR}/src/autogen"

source/install_build_prerequisites.sh

@@ -37,11 +37,23 @@ fi
 
 print_status "Detected OS: $OS $VER"
 
+
+#----------------------------------------------------------------------------------------------------------
+# INSTALL PREREQUISITE PACKAGES
+#----------------------------------------------------------------------------------------------------------
+
 # Define packages based on distribution
 case $OS in
     "Ubuntu"|"Debian GNU/Linux")
         # Common packages for both Ubuntu and Debian
-        PACKAGES="cmake make g++ devscripts debhelper build-essential upx"
+        PACKAGES="bash cmake make g++ devscripts debhelper build-essential upx musl-tools wget tar ccache ninja-build"
+        INSTALLCMD="apt-get install -y"
+        UPDATECMD="apt-get update"
+        ;;
+    "Alpine Linux")
+        PACKAGES="bash build-base cmake git nlohmann-json wget tar curl ninja mold nodejs npm"
+        INSTALLCMD="apk add --no-cache"
+        UPDATECMD="apk update"
         ;;
     *)
         print_error "Unsupported distribution: $OS"
@@ -51,19 +63,29 @@ esac
 
 # Function to check if a package is installed
 is_package_installed() {
-    dpkg -l "$1" 2>/dev/null | grep -q "^ii"
+    if [ "$OS" = "Alpine Linux" ]; then
+        # Use apk info <pkg> and check exit status
+        apk info "$1" >/dev/null 2>&1
+        return $?
+    else
+        dpkg -l "$1" 2>/dev/null | grep -q "^ii"
+    fi
 }
 
-# Update package lists
-print_status "Updating package lists..."
-apt-get update
+UPDATED=false
 
 # Install missing packages
 print_status "Checking and installing required packages..."
 for pkg in $PACKAGES; do
     if ! is_package_installed "$pkg"; then
+        if [ "$UPDATED" = false ]; then
+            print_status "Updating package lists..."
+            $UPDATECMD
+            UPDATED=true
+        fi
+
         print_status "Installing $pkg..."
-        apt-get install -y "$pkg"
+        $INSTALLCMD "$pkg"
         if [ $? -ne 0 ]; then
             print_error "Failed to install $pkg"
             exit 1
@@ -73,82 +95,71 @@ for pkg in $PACKAGES; do
     fi
 done
 
-# Verify all required tools are installed
-print_status "Verifying installation..."
-for tool in cmake make g++; do
-    if ! command -v "$tool" &> /dev/null; then
-        print_error "$tool is not installed properly"
-        exit 1
-    fi
-done
-
-
-
-# Install other required packages
-apt install -y musl-tools wget tar ccache ninja-build
+# ----------------------------------------------------------------------------------------------------------
+# MUSL CROSS COMPILERS
+# ----------------------------------------------------------------------------------------------------------
 
 # Set install directory
 if [ -n "$SUDO_USER" ] && [ "$SUDO_USER" != "root" ]; then
-    USER_HOME=$(eval echo ~$SUDO_USER)
+    USER_HOME=$(eval echo "~$SUDO_USER")
 else
     USER_HOME="$HOME"
 fi
 INSTALL_DIR="$USER_HOME/.musl-cross"
 mkdir -p "$INSTALL_DIR"
 
-MUSL_CC_URL="https://musl.cc"
 TMPDIR=$(mktemp -d)
 trap 'rm -rf "$TMPDIR"' EXIT
 
-# x86_64
-if [ ! -d "$INSTALL_DIR/x86_64-linux-musl-cross" ]; then
-    echo "Downloading x86_64 musl cross toolchain..."
-    wget -nc -O "$TMPDIR/x86_64-linux-musl-cross.tgz" $MUSL_CC_URL/x86_64-linux-musl-cross.tgz
-    tar -C "$INSTALL_DIR" -xvf "$TMPDIR/x86_64-linux-musl-cross.tgz"
-fi
+function install_musl_cross() {
+    local TOOLCHAIN="$1"
+    local MUSL_CC_URL="https://musl.cc"
+    if [ ! -d "$INSTALL_DIR/$TOOLCHAIN" ]; then
+        echo "Downloading $TOOLCHAIN musl cross toolchain..."
+        wget -nc -O "$TMPDIR/$TOOLCHAIN.tgz" "$MUSL_CC_URL/$TOOLCHAIN.tgz"
+        tar -C "$INSTALL_DIR" -xvf "$TMPDIR/$TOOLCHAIN.tgz"
+    fi
+}
 
-# aarch64
-if [ ! -d "$INSTALL_DIR/aarch64-linux-musl-cross" ]; then
-    echo "Downloading aarch64 musl cross toolchain..."
-    wget -nc -O "$TMPDIR/aarch64-linux-musl-cross.tgz" $MUSL_CC_URL/aarch64-linux-musl-cross.tgz
-    tar -C "$INSTALL_DIR" -xvf "$TMPDIR/aarch64-linux-musl-cross.tgz"
-fi
+function check_path() {
+    if [ -n "$SUDO_USER" ] && [ "$SUDO_USER" != "root" ]; then
+        local BASHRC="$USER_HOME/.bashrc"
+        local TOOLCHAIN="$1"
+        local MUSL_PATH="$INSTALL_DIR/$TOOLCHAIN/bin"
+        if ! echo "$PATH" | grep -q "$MUSL_PATH"; then
+            echo "Adding $MUSL_PATH to PATH in $BASHRC"
+            PATH_LINE="export PATH=\"$MUSL_PATH:\$PATH\""
+            if ! grep -Fxq "$PATH_LINE" "$BASHRC"; then
+                echo "" >> "$BASHRC"
+                echo "# Add musl cross compilers to PATH for dropshell" >> "$BASHRC"
+                echo "$PATH_LINE" >> "$BASHRC"
+                echo "Added musl cross compilers to $BASHRC"
+                echo "You should run 'source ~/.bashrc' to update your PATH"
+            else
+                echo "You should run 'source ~/.bashrc' to update your PATH"
+            fi
+        fi
+    fi
+}
 
-# Print instructions for adding to PATH
-# cat <<EOF
 
-# To use the musl cross compilers, add the following to your shell:
-# export PATH="$INSTALL_DIR/x86_64-linux-musl-cross/bin:$INSTALL_DIR/aarch64-linux-musl-cross/bin:$PATH"
+TOOLCHAIN_LIST=(
+    "aarch64-linux-musl-cross"
+    "x86_64-linux-musl-cross"
+    "x86_64-linux-musl-native"
+)
 
-# Or run:
-#     export PATH="$INSTALL_DIR/x86_64-linux-musl-cross/bin:$INSTALL_DIR/aarch64-linux-musl-cross/bin:\$PATH"
-
-# EOF
+for TOOLCHAIN in "${TOOLCHAIN_LIST[@]}"; do
+    install_musl_cross "$TOOLCHAIN"
+    check_path "$TOOLCHAIN"
+done
 
 # Clean up
 rm -rf "$TMPDIR"
 
-# If run with sudo, add to invoking user's ~/.bashrc
-if [ -n "$SUDO_USER" ] && [ "$SUDO_USER" != "root" ]; then
-    BASHRC="$USER_HOME/.bashrc"
-    EXPORT_LINE="export PATH=\"$INSTALL_DIR/x86_64-linux-musl-cross/bin:$INSTALL_DIR/aarch64-linux-musl-cross/bin:\$PATH\""
-    if ! grep -Fxq "$EXPORT_LINE" "$BASHRC"; then
-        echo "" >> "$BASHRC"
-        echo "# Add musl cross compilers to PATH for bb64" >> "$BASHRC"
-        echo "$EXPORT_LINE" >> "$BASHRC"
-        echo "Added musl cross compilers to $BASHRC"
-    else
-        echo "musl cross compiler PATH already present in $BASHRC"
-    fi
-fi
-
-# check if dehydrate command is installed
-if ! command -v dehydrate &> /dev/null; then
-    curl -fsSL https://gitea.jde.nz/public/dehydrate/releases/download/latest/install.sh | bash
-fi
-
-dehydrate -u
-
+# ----------------------------------------------------------------------------------------------------------
+# COMPLETE
+# ----------------------------------------------------------------------------------------------------------
 
 print_status "All dependencies installed successfully!"
 print_status "You can now run ./build.sh to build the project" 

source/publish.sh

@@ -9,74 +9,21 @@ echo "Script directory: $SCRIPT_DIR"
 TOKEN="${GITEA_TOKEN_DEPLOY:-${GITEA_TOKEN}}"
 [ -z "$TOKEN" ] && { echo "Neither GITEA_TOKEN_DEPLOY nor GITEA_TOKEN environment variable set!" >&2; exit 1; }
 
-$SCRIPT_DIR/multibuild.sh
-BUILD_DIR=$SCRIPT_DIR/build
-
-OLD_PWD=$PWD
-cd $SCRIPT_DIR
-
-# Check for required binaries
-REQUIRED_BINARIES=("dropshell.x86_64" "dropshell.aarch64")
-for binary in "${REQUIRED_BINARIES[@]}"; do
-    if [ ! -f "output/$binary" ]; then
-        echo "output/$binary not found!" >&2
-        echo "Please run multibuild.sh first." >&2
-        exit 1
-    fi
-done
-
-TAG=$("$SCRIPT_DIR/output/dropshell.x86_64" --version)
-[ -z "$TAG" ] && echo "Failed to get version from dropshell.x86_64" >&2 && exit 1
+OLD_PWD="$PWD"
+cd "$SCRIPT_DIR" || exit 1
+TEMP_DIR=$(mktemp -d)
+trap 'rm -rf "$TEMP_DIR" && cd "$OLD_PWD"' EXIT
 
+ARCH=$(uname -m)
+TAG=$("$SCRIPT_DIR/output/dropshell.${ARCH}" --version)
+[ -z "$TAG" ] && echo "Failed to get version from dropshell.${ARCH}" >&2 && exit 1
 echo "Publishing dropshell version $TAG"
 
-# make sure we've commited.
-git add "$SCRIPT_DIR/../" && git commit -m "dropshell release $TAG" && git push
 
-
-# Find repo info from .git/config
-REPO_URL=$(git config --get remote.origin.url)
-if [[ ! $REPO_URL =~ gitea ]]; then
-    echo "Remote origin is not a Gitea repository: $REPO_URL" >&2
+function die() {
+    echo "$@" >&2
     exit 1
-fi
-
-# Extract base URL, owner, and repo
-# Example: https://gitea.example.com/username/reponame.git
-BASE_URL=$(echo "$REPO_URL" | sed -E 's#(https?://[^/]+)/.*#\1#')
-OWNER=$(echo "$REPO_URL" | sed -E 's#.*/([^/]+)/[^/]+(\.git)?$#\1#')
-REPO=$(echo "$REPO_URL" | sed -E 's#.*/([^/]+)(\.git)?$#\1#')
-
-API_URL="$BASE_URL/api/v1/repos/$OWNER/$REPO"
-
-# Create release
-RELEASE_DATA=$(cat <<EOF
-{
-  "tag_name": "$TAG",
-  "name": "$TAG",
-  "body": "dropshell release $TAG",
-  "draft": false,
-  "prerelease": false
 }
-EOF
-)
-
-# Capture stdout and stderr of the curl command
-CURL_OUTPUT=$(curl -X POST "$API_URL/releases" \
-    -H "Content-Type: application/json" \
-    -H "Authorization: token $TOKEN" \
-    -d "$RELEASE_DATA" 2>&1)
-
-# Extract the release ID from the captured output
-RELEASE_ID=$(echo "$CURL_OUTPUT" | grep -o '"id":[0-9]*' | head -1 | cut -d: -f2)
-
-if [ -z "$RELEASE_ID" ]; then
-    echo "Failed to create release on Gitea." >&2
-    echo "Release ID returned: $RELEASE_ID" >&2
-    echo "Curl Output/Error:" >&2
-    echo "$CURL_OUTPUT" >&2
-    exit 1
-fi
 
 # Function to find file in specified locations
 find_file() {
@@ -94,25 +41,17 @@ find_file() {
     return 1
 }
 
+curl -L -s -o "${TEMP_DIR}/sos" "https://getbin.xyz/sos" || die "Failed to download sos"
+chmod +x "${TEMP_DIR}/sos"
+
+
 # Upload binaries and install.sh
-for FILE in dropshell.x86_64 dropshell.aarch64 install.sh server_autosetup.sh; do
+for FILE in dropshell.x86_64 dropshell.aarch64 dropshell-install.sh dropshell-server-autosetup.sh; do
     # Pass the locations directly to the find_file function
     filetoupload=$(find_file "$FILE" "output" "../" ".")
-    if [ -z "$filetoupload" ]; then
-        echo "File $FILE not found in expected locations!" >&2
-        continue
-    fi
+    [ -z "$filetoupload" ] && die "File $FILE not found in expected locations!"
 
-    # Auto-detect content type
-    ctype=$(file --mime-type -b "$filetoupload")
-
-    curl -X POST "$API_URL/releases/$RELEASE_ID/assets?name=$FILE" \
-        -H "Content-Type: $ctype" \
-        -H "Authorization: token $TOKEN" \
-        --data-binary @"$filetoupload"
-    echo "Uploaded $FILE to release $TAG as $ctype."
+    "${TEMP_DIR}/sos" upload getbin.xyz "$filetoupload" "$FILE:latest" "$FILE:TAG"
 done
 
-echo "Published dropshell version $TAG to $REPO_URL (tag $TAG) with binaries."
-
-cd $OLD_PWD
+echo "Published dropshell $TAG to getbin.xyz"

source/src/commands/create-service.cpp

@@ -103,6 +103,11 @@ namespace dropshell
             if (server_name.empty() || template_name.empty() || service_name.empty())
                 return false;
 
+            if (!legal_service_name(service_name)) {
+                error << "Service name contains illegal characters: " << service_name << std::endl;
+                return false;
+            }
+
             ServerConfig server_info(server_name);
             if (!server_info.is_valid())
             {

source/src/commands/edit.cpp

@@ -94,11 +94,11 @@ int edit_config()
 
     std::string config_file = localfile::dropshell_json();
     if (!edit_file(config_file, false) || !std::filesystem::exists(config_file))
-        return die("Failed to edit config file.");
+        return return_die("Failed to edit config file.");
 
     gConfig().load_config();
     if (!gConfig().is_config_set())
-        return die("Failed to load and parse edited config file!");
+        return return_die("Failed to load and parse edited config file!");
 
     gConfig().save_config(true);
 
@@ -130,6 +130,28 @@ int edit_server(const std::string &server_name)
     return 0;
 }
 
+void list_directory(std::string dir, std::string msg)
+{
+    bool first=true;
+    std::vector<std::string> directories;
+    for (const auto &file : std::filesystem::directory_iterator(dir))
+    {
+        if (first)
+        {
+            if (!msg.empty())
+                info << msg << std::endl;
+            first=false;
+        }
+        if (std::filesystem::is_directory(file.path()))
+            directories.push_back(file.path());
+        else
+            info << "  " << file.path() << std::endl;
+    }
+
+    for (const auto &dir : directories)
+        list_directory(dir, "");
+}
+
 // ------------------------------------------------------------------------------------------------
 // edit service config
 // ------------------------------------------------------------------------------------------------
@@ -143,7 +165,14 @@ int edit_service_config(const std::string &server, const std::string &service)
     }
 
     if (edit_file(config_file, true) && std::filesystem::exists(config_file))
-        info << "To apply your changes, run:\n   dropshell install " + server + " " + service << std::endl;
+        info << "Successfully edited service config file at " << config_file << std::endl;
+
+        std::string service_dir = localpath::service(server, service);
+        list_directory(service_dir, "You may wish to edit the other files in " + service_dir);
+
+        info << "Then to apply your changes, run:" << std::endl;
+        info << "   dropshell uninstall " + server + " " + service << std::endl;
+        info << "   dropshell install " + server + " " + service << std::endl;
     return 0;
 }
 

source/src/commands/hash.cpp

@@ -0,0 +1,83 @@
+#include "command_registry.hpp"
+#include "config.hpp"
+#include "utils/utils.hpp"
+#include "utils/directories.hpp"
+#include "shared_commands.hpp"
+#include "version.hpp"
+#include "hash.hpp"
+
+#include <unistd.h>
+#include <cstring>
+#include <iostream>
+#include <sstream>
+#include <filesystem>
+#include <libassert/assert.hpp>
+
+namespace dropshell {
+
+void hash_autocomplete(const CommandContext& ctx);
+int hash_handler(const CommandContext& ctx);
+
+static std::vector<std::string> hash_name_list={"hash"};
+
+// Static registration
+struct HashCommandRegister {
+    HashCommandRegister() {
+        CommandRegistry::instance().register_command({
+            hash_name_list,
+            hash_handler,
+            hash_autocomplete,
+            false, // hidden
+            false, // requires_config
+            false, // requires_install
+            0,     // min_args (after command)
+            1,     // max_args (after command)
+            "hash [FILE|DIRECTORY]",
+            "Hash a file or directory.",
+            // heredoc
+            R"(
+            Hash a file or directory recursively.
+            )"
+        });
+    }
+} hash_command_register;
+
+
+void hash_autocomplete(const CommandContext& ctx) {
+    if (ctx.args.size() == 0) {
+        // list all files and directories in the current directory
+        for (const auto& entry : std::filesystem::directory_iterator(".")) {
+            rawout << entry.path().string() << std::endl;
+        }
+    }
+    return;
+}
+
+int hash_handler(const CommandContext& ctx) {
+    std::filesystem::path path = safearg(ctx.args, 0);
+    if (path.empty())
+      path=std::filesystem::current_path();
+
+    if (!std::filesystem::exists(path))
+    {
+        error << "Does not exist: " << path.string() << std::endl;
+        return 1;
+    }
+
+    if (std::filesystem::is_directory(path))
+    {
+        // hash the directory recursively
+        uint64_t hash = hash_directory_recursive(path.string());
+        std::cout << hash << std::endl;
+    }
+    else
+    {
+        // hash the file
+        uint64_t hash = hash_file(path.string());
+        std::cout << hash << std::endl;
+    }
+    return 0;
+}
+
+
+} // namespace dropshell

source/src/commands/install.cpp

@@ -69,7 +69,29 @@ namespace dropshell
             std::string server = server_env.get_server_name();
             LocalServiceInfo service_info = get_service_info(server_env.get_server_name(), service);
 
-            if (!SIvalid(service_info) || !service_info.service_template_hash_match)
+            if (!SIvalid(service_info))
+                {
+                    error << "Failed to install - service information not valid." << std::endl;
+                    return false;
+                }
+            
+            if (!server_env.is_valid())
+                return false; // should never hit this.
+
+            
+            std::string user = service_info.user;
+            std::string remote_service_path = remotepath(server,user).service(service);
+
+            ASSERT(!remote_service_path.empty(), "Install_Service: Remote service path is empty for " + service + " on " + server);
+            ASSERT(!user.empty(), "Install_Service: User is empty for " + service + " on " + server);
+
+            if (server_env.check_remote_dir_exists(remote_service_path, user))
+            { // uninstall the old service before we update the config or template!
+                info << "Service " << service << " is already installed on " << server << std::endl;
+                shared_commands::uninstall_service(server_env, service);
+            }
+
+            if (!service_info.service_template_hash_match)
             {
                 warning << "Service " << service << " is using an old template. Updating. " << std::endl;
                 if (!merge_updated_service_template(server_env.get_server_name(), service))
@@ -88,9 +110,6 @@ namespace dropshell
 
             maketitle("Installing " + service + " (" + service_info.template_name + ") on " + server);
 
-            if (!server_env.is_valid())
-                return false; // should never hit this.
-
             // Check if template exists
             template_info tinfo = gTemplateManager().get_template_info(service_info.template_name);
             if (!tinfo.is_set())
@@ -103,8 +122,6 @@ namespace dropshell
             }
 
             // Create service directory
-            std::string user = server_env.get_user_for_service(service);
-            std::string remote_service_path = remotepath(server,user).service(service);
             std::string mkdir_cmd = "mkdir -p " + quote(remote_service_path);
             if (!execute_ssh_command(server_env.get_SSH_INFO(user), sCommand("", mkdir_cmd, {}), cMode::Silent))
             {
@@ -112,14 +129,6 @@ namespace dropshell
                 return false;
             }
 
-            // Check if rsync is installed on remote host
-            std::string check_rsync_cmd = "which rsync";
-            if (!execute_ssh_command(server_env.get_SSH_INFO(user), sCommand("", check_rsync_cmd, {}), cMode::Silent))
-            {
-                std::cerr << "rsync is not installed on the remote host" << std::endl;
-                return false;
-            }
-
             // Copy template files
             debug << "Copying: [LOCAL] " << tinfo.local_template_path() << std::endl
                   << std::string(8, ' ') << "[REMOTE] " << remotepath(server,user).service_template(service) << "/" << std::endl;
@@ -143,7 +152,13 @@ namespace dropshell
             // Run install script
             {
                 info << "Running " << service_info.template_name << " install script on " << server << "..." << std::endl;
-                server_env.run_remote_template_command(service, "install", {}, false, {});
+
+                shared_commands::cRemoteTempFolder remote_temp_folder(server_env, user);
+                if (!server_env.run_remote_template_command(service, "install", {}, false, {{"TEMP_DIR", remote_temp_folder.path()}}))
+                {
+                    error << "Failed to run install script on " << server << std::endl;
+                    return false;
+                }
             }
 
             // print health tick
@@ -295,7 +310,7 @@ complete -F _dropshell_completions ds
         std::filesystem::remove(exe_path.parent_path() / "dropshell.old");
 
         // execute the new version
-        execlp("bash", "bash", "-c", (parent_path / "dropshell").c_str(), "install", (char *)nullptr);
+        execlp("bash", "bash", "-c", (exe_path.parent_path() / "dropshell").string() + "install", (char *)nullptr);
         error << "Failed to execute new version of dropshell." << std::endl;
         return -1;
     }

source/src/commands/shared_commands.cpp

@@ -75,9 +75,9 @@ namespace dropshell
             // determine the architecture of the system
             std::string arch;
 #ifdef __aarch64__
-            arch = "arm64";
+            arch = "aarch64";
 #elif __x86_64__
-            arch = "amd64";
+            arch = "x86_64";
 #endif
             return arch;
         }

source/src/commands/ssh.cpp

@@ -61,6 +61,12 @@ namespace dropshell
             return false;
         }
 
+        if (!legal_service_name(service))
+        {
+            error << "Service name contains illegal characters: " << service << std::endl;
+            return false;
+        }
+
         LocalServiceInfo sinfo = get_service_info(server, service);
         if (!SIvalid(sinfo))
         {

source/src/commands/start.cpp

@@ -51,6 +51,12 @@ namespace dropshell
             return false;
         }
 
+        if (!legal_service_name(service))
+        {
+            error << "Service name contains illegal characters: " << service << std::endl;
+            return false;
+        }
+
         // run the start script.
         bool started = server_env.run_remote_template_command(service, "start", {}, false, {});
 

source/src/commands/stop.cpp

@@ -51,6 +51,12 @@ namespace dropshell
             return false;
         }
 
+        if (!legal_service_name(service))
+        {
+            error << "Service name contains illegal characters: " << service << std::endl;
+            return false;
+        }
+
         // run the stop script.
         bool stopped = server_env.run_remote_template_command(service, "stop", {}, false, {});
 

source/src/dropshell-completion.bash

@@ -6,8 +6,8 @@ _dropshell_completions() {
     cur="${COMP_WORDS[COMP_CWORD]}"
     
     # call dropshell to get the list of possiblities for the current argument. Supply all previous arguments.
-    local completions=($(dropshell autocomplete "${COMP_WORDS[@]:1:${COMP_CWORD}-1}"))
-    COMPREPLY=( $(compgen -W "${completions[*]}" -- ${cur}) )
+    mapfile -t completions < <(dropshell autocomplete "${COMP_WORDS[@]:1:${COMP_CWORD}-1}")
+    mapfile -t COMPREPLY < <(compgen -W "${completions[*]}" -- "$cur")
     return 0
 }
 

source/src/servers.cpp

@@ -149,12 +149,20 @@ namespace dropshell
 
     std::string get_user_for_service(const std::string &server, const std::string &service)
     {
+        if (!legal_service_name(service))
+        {
+            error << "Service name contains illegal characters: " + service << std::endl;
+            return "";
+        }
+
         auto services_info = get_server_services_info(server);
         auto it = std::find_if(services_info.begin(), services_info.end(),
                          [&service](const LocalServiceInfo &si)
                          { return si.service_name == service; });
         if (it != services_info.end() && SIvalid(*it))
             return it->user;
+
+        debug << "Couldn't find user for service \"" << service << "\" on server \"" << server << "\"" << std::endl;
         return "";
     }
 
@@ -345,6 +353,8 @@ namespace dropshell
             return std::nullopt;
         }
 
+        env_vars["HOST_NAME"] = get_SSH_HOST();
+
         std::string argstr = "";
         for (const auto &arg : args)
         {

source/src/services.cpp

@@ -80,6 +80,9 @@ namespace dropshell
         if (server_name.empty() || service_name.empty())
             return LocalServiceInfo();
 
+        if (!legal_service_name(service_name))
+            return LocalServiceInfo();
+
         service.service_name = service_name;
 
         service.local_service_path = localpath::service(server_name, service_name);
@@ -230,6 +233,13 @@ namespace dropshell
                 warning << "Expected environment file not found: " << file << std::endl;
         };
 
+
+        // add in some simple variables first, as others below may depend on/use these in bash.
+        // if we change these, we also need to update agent/_allservicesstatus.sh
+        all_env_vars["SERVER"] = server_name;
+        all_env_vars["SERVICE"] = service_name;
+        all_env_vars["DOCKER_CLI_HINTS"] = "false"; // turn off docker junk.
+
         // Load environment files
         load_env_file(localfile::service_env(server_name, service_name));
         load_env_file(localfile::template_info_env(server_name, service_name));
@@ -243,13 +253,10 @@ namespace dropshell
             return false;
         }
 
-        // add in some handy variables.
-        // if we change these, we also need to update agent/_allservicesstatus.sh
+        // more additional, these depend on others above.
         all_env_vars["CONFIG_PATH"] = remotepath(server_name, user).service_config(service_name);
-        all_env_vars["SERVER"] = server_name;
-        all_env_vars["SERVICE"] = service_name;
         all_env_vars["AGENT_PATH"] = remotepath(server_name, user).agent();
-        all_env_vars["DOCKER_CLI_HINTS"] = "false"; // turn off docker junk.
+
 
         // determine template name.
         auto it = all_env_vars.find("TEMPLATE");

source/src/templates.cpp

@@ -171,6 +171,11 @@
 
     bool template_manager::create_template(const std::string &template_name) const
     {
+        if (!legal_service_name(template_name)) {
+            error << "Template name contains illegal characters: " << template_name << std::endl;
+            return false;
+        }
+
         // 1. Create a new directory in the user templates directory
         std::vector<std::string> local_server_definition_paths = gConfig().get_local_server_definition_paths();
         

source/src/utils/utils.cpp

@@ -312,7 +312,7 @@ std::string requote(std::string str) {
 }
 
 
-int die(const std::string & msg) {
+int return_die(const std::string & msg) {
     error << "Fatal error:" << std::endl;
     error << msg << std::endl;
     return 1;
@@ -650,4 +650,24 @@ bool file_replace_or_add_segment(std::string filepath, std::string segment)
     return true;
 }
 
+bool legal_service_name(const std::string &service_name) {
+    static bool initialized = false;
+    static bool legal_chars[256] = {false};  // Initialize all to false
+
+    // One-time initialization
+    if (!initialized) {
+        // Set true for valid characters
+        for (unsigned char c : "0123456789"
+                              "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+                              "abcdefghijklmnopqrstuvwxyz"
+                              "._-") {
+            legal_chars[c] = true;
+        }
+        initialized = true;
+    }
+
+    return std::all_of(service_name.begin(), service_name.end(),
+        [](unsigned char c) { return legal_chars[c]; });
+}
+
 } // namespace dropshell 

source/src/utils/utils.hpp

@@ -45,7 +45,7 @@ int count_substring(const std::string &substring, const std::string &text);
 
 std::string random_alphanumeric_string(int length);
 
-int die(const std::string & msg);
+int return_die(const std::string & msg);
 std::string safearg(int argc, char *argv[], int index);
 std::string safearg(const std::vector<std::string> & args, int index);
 
@@ -75,4 +75,7 @@ constexpr unsigned int switchhash(const char *s, int off = 0)
     return !s[off] ? 5381 : (switchhash(s, off + 1) * 33) ^ s[off];
 }
 
+bool legal_service_name(const std::string & service_name);
+
+
 } // namespace dropshell 

source/test.sh

@@ -0,0 +1,12 @@
+#!/bin/bash
+set -euo pipefail
+SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
+
+ARCH=$(uname -m)
+
+PREV_DIR=$(pwd)
+trap 'cd "$PREV_DIR"' EXIT
+
+"$SCRIPT_DIR/output/dropshell.${ARCH}" hash "${SCRIPT_DIR}/test.sh"
+"$SCRIPT_DIR/output/dropshell.${ARCH}" help
+